511 seats use the wide base 51 suspension as this gives more stability and longer life in rough conditions. A second damper can be fitted in large tyre applications eg wheel loader. 100mm mechanical coil spring suspension stroke 50-120kg weight adjustment 60mm seat height and tilt adjustment Full seat back recline 200mm slide rail adjustment Suspension cover Provision for second damper 5 position lumbar adjustment

The 514B has an integrated lap sash seat belt in either LH or RH fitment. With the seat belt mounted above suspension there is no lock up as the seat operates, unlike pillar mounted belts. * 100mm mechanical suspension stroke * 60mm seat height and tilt * 50-120kg weight adjustment * Suspension cover * 200mm slide rail adjustment * 5 position lumbar adjustment * Full back angle recline * Provision for second damper

MECHANICAL SEAT. AIR LUMBAR SUPPORT. MANUAL ADJUSTMENT FOR DRIVER 50-120KG. 60MM HEIGHT AND TILT ADJUSTMENT. INTEGRATED FULL HARNESS SEAT BELT (4 POINT)

MECHANICAL SEAT. SHOWN WITH OPTIONAL HEADREST $176 AND ARMRESTS $132 EACH. The 515 seat was designed for construction machinery with wide base mechanical suspension and provision for twin damper. It is ideally suited to wheel loader and grader application. The seat tilt and lumbar give many seat positions for operator comfort

The 521 seat uses 4 coil springs to carry a far greater load (80-150kg) Mainly for use with heavy operators or extra items bolted to seat upper. Note: Seat will not operate for an operator under 80kg * 100mm mechanical suspension stroke * 60mm seat height and tilt * 80-120kg weight adjustment * Full seat back recline * 200mm slide rail adjustment * Provision for second damper * 5 position lumbar adjustment

The 525 Pod seat has been built for excavator or control room operation. It is supplied with empty pod casings to take electric, hydraulic or pneumatic pod controls. With many adjustments, operators can spend their shift with out body fatigue

This is a heavy duty wide base air seat fitted with a medium height T1 seat upper. Ideally suited for heavy duty applications with small cabin area. It can also be fitted with a second damper. * 125mm air suspension stroke * 60mm seat height and tilt * 50-155kg weight adjustment * Full seat back angle recline * 200mm slide rail adjustment * Provision for second damper * 5 position lumbar adjustment Suspension cover

The 553 uses a heavy duty wide based suspension unit fitted with a T3 seat upper. It will give good upper body support and still fit small cabin trucks. * 125mm air suspension stroke * 60mm seat height and tilt * 50-155kg weight adjustment * Full seat back angle recline * 200mm slide rail adjustment * Provision for second damper * 5 position lumbar adjustment Suspension cover

AIR SEAT. (SHOWN WITH OPTIONAL HEADREST $176 AND ARMRESTS $132 EACH). 5 POSITION LUMBAR SUPPORT. FORE AND AFT ADJUSTMENT 200MM. 60MM SEAT HEIGHT AND TILT ADJUSTMENT. 125MM AIR SUSPENSION STROKE MANUAL VALVE. MOULDED BODY CONTOURED CUSHIONS

RIGID STEEL PAN. VENTILATION AND SURFACE DRAINAGE GROOVES. SIDE RAIL ADJUSTMENT. CAN BE USED WITH XL2 OR XH2 SUSPENSION UNIT. The P2 seat is used for tractors, mowers, rollers, bobcat attachments etc. With its one piece construction and PVC water proof trim, it is ideal for outside use. *** HEADREST AND SEAT BELT OPTIONAL EXTRAS ***

The U2 seat can be used as a static seat or combined with XL2, XH2,11,15 suspenion unit and rails to produce a compact seat to suit tractors up to 80 HP. Back extension and arm rests may be added to give greater support

MECHANICAL CLOTH UPPER. (SHOWN WITH OPTIONAL ARMRESTS $132 EACH) The U4 seat can be used as a static seat or combined with XL2, XH2, 11, 15 suspension unit and rails to produce a compact seat to suit tractors up to 80 HP With cloth trims and contoured seat and back foams lateral support is enhanced.